LNXT 0150 MDF Jharoka Laxmi Ji & Ganesh Ji | Pack of 2 Pairs | Divine & Spiritual

MDF Jharoka Laxmi Ji & Ganesh Ji

Recommended Uses & Craft Suggestions:

• Mandir Altar & Home Temple Walls: Mount this auspicious jharoka pair on temple backdrops or sanctum walls to create a regal traditional shrine.

• Main Entrance Door & Threshold Decor: Fix this protective pair flanking your main entrance door or foyer to welcome positive energy and auspicious blessings.

• Festive Shagun Hampers & Wedding Platters: Place this sacred jharoka centerpiece onto dry fruit trays, bridal trousseau gift hampers, and sweet boxes.

• Diwali Wall Hangings & Doorway Torans: String these architectural frames into decorative doorway valances alongside brass bells, golden gota, and marigold garlands.

• Pooja Room Backdrop Panels: Glue this ornamental jharoka pair onto wooden display panels, velvet wall art, and festive decorative frames.

Product Description

Infuse spiritual elegance, royal Rajasthani architecture, and sacred festive blessings into your living spaces and celebration decor with the MDF Jharoka Laxmi Ji & Ganesh Ji (Product Code: LNXT 0150).

Carefully designed, laser-cut, and thoroughly inspected by LevonyaNXT, this wholesale pack of 2 pairs (4 individual plaques) features traditional arched palace window silhouettes adorned with divine depictions of Goddess Laxmi and Lord Ganesha.

Measuring 3.15 inches in horizontal width, 0.20 inches in sturdy panel depth, and 5.90 inches in vertical height (approx. 80.01 MM × 5.08 MM × 149.86 MM), each architectural jharoka plaque presents a majestic stepped dome crown framing a multi-layered devotional alcove.

The upper pediment of each plaque features ornate laser-cut lattice arches, miniature dome finials, and a pre-drilled top hanging eyelet.

Directly below the dome, auspicious Hindi calligraphy highlights sacred mantras: “शुभ” (Shubh – Auspiciousness) above Goddess Laxmi and “लाभ” (Laabh – Prosperity) above Lord Ganesha.

The inner arch displays Goddess Laxmi seated gracefully upon an open pink lotus flower, surrounded by rich crimson and golden flourishes.

Complementing her, the companion jharoka frames Lord Ganesha in royal ceremonial attire with raised blessing hands, holding his sacred modak and lotus blossom.

Crafted from high-density engineered MDF wood, each architectural jharoka frame maintains exceptional rigidity, resisting warping, bending, and moisture distortion over time.

The front facade features UV-curable multi-color graphic printing enhanced with delicate pearl-dot border patterns and warm woodgrain styling.

Crafters and festive decorators can effortlessly hang these plaques using the integrated eyelet, attach double-sided mounting foam, or bond them directly onto hard surfaces using wood glue or clear craft adhesives in minutes.

Supplied in a practical pack of 2 pairs (4 plaques total), this sacred jharoka set provides home decorators, event planners, and gift packaging studios with enough matching units to complete multiple entryway displays, festive altar settings, or bespoke return gift presentations.

The balanced 5.90-inch scale creates an unmistakable visual focal point without overcrowding surrounding wall hangings or temple brassware.

Despite the thick 0.20-inch engineered wood base, each jharoka unit maintains a lightweight build that mounts safely on standard drywall, glass doors, plywood altars, and gift boxes.

Every detail in this devotional item reflects clean laser cutting, smooth edge finishing, and vibrant color saturation.

Whether you are decorating for Diwali, hosting a housewarming ceremony, or designing personalized wedding favor trays for guests, this devotional jharoka set offers an effortless way to introduce auspicious Indian heritage into your home.

Care Instructions: As a handcrafted engineered wood and print product, handle each decorative piece with care to protect its printed surface and laser-cut edges.

Avoid washing with water and do not submerge in cleaning liquids or detergents.

Protect the surface from direct rain and prolonged exposure to damp weather.

Clean the printed face gently using a soft, clean, dry microfiber cloth to remove dust and fingerprints.

Store unused units flat inside a dry storage drawer or sealed pouch away from excessive moisture to preserve color depth and wood stability for years.

Best For – Home temple mandirs, entrance doorway decor, Diwali wall hangings, wedding shagun trays, pooja room backdrops, and festive housewarming gifts.

Quick Product Summary

Detail	Specification
Product Name	MDF Jharoka Laxmi Ji & Ganesh Ji
Product Code	LNXT 0150
Focus Keyword	jharoka
Category	Laser Cutouts / Devotional MDF Wall Art & Decor Plaques
Base Material	High-Density Engineered MDF Wood (Medium-Density Fibreboard)
Work Technique	Precision Laser Cutting, UV-Curable Print & Border Inlay
Design Motif	Traditional Rajasthani Arched Palace Window with Deities
Dimensions	3.15″ Width × 0.20″ Depth × 5.90″ Height (80 MM × 5 MM × 150 MM)
Pack Count	Wholesale Pack of 2 Pairs (4 Individual Pieces)
Color Scheme	Multi Colors (Crimson Red, Gold, Warm Teak, Pink & White)
How to Fix	Top Hanging Eyelet, Double-Sided Foam Tape, or Craft Adhesive
Primary Use	Mandir walls, entrance doors, Diwali torans, wedding trays

Overview & Easy Ways to Use It

The ornamental arched window, or palace balcony, has stood as an iconic architectural motif of Indian royal heritage and traditional temples for centuries.

Representing divine vision, royal shelter, and sacred hospitality, incorporating a devotional jharoka frame into your home brings timeless architectural dignity and spiritual positivity.

The MDF Jharoka Laxmi Ji & Ganesh Ji (LNXT 0150) by LevonyaNXT gives creators and festive decorators an easy-to-use centerpiece that cuts assembly time.

The vibrant crimson and gold artwork catches warm indoor lighting with rich depth, while the crisp laser-cut borders provide clean architectural contrast against light and dark background walls.

Home decorators and boutique gift stylists love working with this jharoka pair because it simplifies festive room styling.

Instead of hand-painting wooden cutouts or assembling separate deity pictures, you can mount these finished devotional frames onto entrance doorways, temple backdrops, or gift hampers in minutes.

For Diwali celebrations, Griha Pravesh poojas, and wedding celebrations, placing an auspicious jharoka set beside doorframes welcomes Goddess Laxmi and Lord Ganesha to bless the household with prosperity and peace.

Measuring approximately 5.90 inches tall, each plaque provides balanced decorative coverage on living room walls, temple altars, and doorway valances.

Key Features

• Auspicious Deity Inlay: Features vibrant portrayals of Goddess Laxmi and Lord Ganesha framed in a traditional jharoka arch.

• Sacred Shubh Laabh Mantras: Embellished with clear Hindi lettering (“शुभ” & “लाभ”) to invite good fortune and prosperity.

• Precision Laser Cut Edges: Engineered with clean computerized cuts that eliminate rough burrs, chips, and splintering.

• Sturdy 0.20″ MDF Base: Built on solid 5 MM engineered wood that resists warping, bending, and everyday handling impact.

• Vibrant UV Print Facade: Coated with fade-resistant inks that preserve rich crimson, gold, and pink hues over time.

• Handy Top Hanging Eyelet: Integrated top suspension hole makes hanging this jharoka plaque effortless with nails or threads.

• Pearl-Patterned Border Inlay: Detailed with white simulated pearl dots along the outer arch frame for royal palace realism.

• Wholesale Pack of 2 Pairs: Contains 4 individual plaques (2 Laxmi Ji & 2 Ganesh Ji) for multi-room decor and gifting.

• Multi-Surface Mounting Freedom: Mount each jharoka easily using hanging cords, wall hooks, foam tape, or wood glue.

• Lightweight Profile: Sturdy yet light enough to stick onto glass doors, wooden cupboards, and gift hampers securely.

• Commercial Studio Ready: A dependable craft asset for festive decor brands, wedding planners, and boutique handicraft studios.

Materials & Build Quality

High-Density Engineered Wood Base:

• The structural core of this jharoka plaque is made from premium medium-density fibreboard (MDF) with uniform internal density.

• The 0.20-inch (5 MM) thickness provides structural stability while keeping the finished piece light enough for wall adhesives.

• High-precision computerized laser routing produces clean edges along the outer stepped arch and lattice dome.

• The engineered wood core resists environmental temperature changes, preventing the plaque from bending or cracking.

• The smooth, sanded reverse side allows even contact for double-sided foam tapes, hot melt glues, and mounting brackets.

Fade-Resistant Multi-Color Printing:

• The front facade of each jharoka is finished with high-resolution digital UV-cured printing that seals the pigments directly into the board.

• The artwork features crisp detail, highlighting the lotus petals, deity ornaments, and architectural brickwork.

• The color dyes resist fading from ambient room lighting, keeping the crimson red and golden yellow tones vivid over time.

• The surface is sealed against light scuffing, allowing easy dusting without smudging the artwork.

Clean Laser-Cut Geometry:

• Laser-cut lattice arches and scalloped dome finials give the jharoka a genuine royal Rajasthani palace aesthetic.

• Smooth interior cutouts prevent thread snagging when incorporating the plaques into hanging torans and fabric valances.

• The pre-drilled eyelet at the crown is reinforced by surrounding wood density to prevent tearing under hanging tension.

Comprehensive Design Breakdown & Handcrafting Technique

Constructing an architectural laser cutout of this standard requires careful digital drafting, laser calibration, and quality printing:

1. Architectural Pattern Drafting:

The design begins with vector CAD modeling that captures the traditional proportions of a royal Rajasthani jharoka balcony. The stepped dome, lattice frieze, central alcove, and base brackets are aligned with classical symmetry.

2. Sacred Iconography Layout:

Artisans position the devotional figures within the inner arch. Goddess Laxmi is placed on a pink lotus holding sacred blossoms, while Lord Ganesha is seated with his modak, both framed by auspicious “शुभ” and “लाभ” headers.

3. Precision CNC Laser Routing:

Industrial laser cutters trace the vector profiles across large MDF sheets. The focused beam cuts cleanly through the 0.20-inch wood, forming the intricate stepped crown and pre-drilled hanging eyelet with microscopic accuracy.

4. High-Definition Graphic Printing:

The cut wood blanks pass into flatbed UV printing units where multi-color graphic inks are applied directly to the surface. Instant ultraviolet light curing bonds the ink permanently to the wood fibers.

5. Edge Finishing & Surface Inspection:

Each jharoka plaque is hand-cleaned to remove residual laser soot along the outer perimeter. Craftsmen inspect the registration of the print, edge smoothness, and hanging hole clarity before sorting into matching deity pairs.

6. Protective Packaging:

The inspected plaques are paired into sets of two (Laxmi Ji and Ganesh Ji) and wrapped securely in protective sleeves to prevent transit scratching.

12 Simple DIY Craft & Festive Decor Ideas

1. Mandir Sanctum Wall Centerpiece

Mount this jharoka pair on either side of your home temple deity idol to create an architectural mandir frame.

2. Main Entrance Door Blessing

Fix the Laxmi Ji and Ganesh Ji plaques on the left and right exterior door panels of your home to welcome visitors with sacred blessings.

3. Diwali Doorway Toran Accent

Incorporate this jharoka pair into handcrafted entrance valances, alternating the wooden plaques with golden gota balls, brass bells, and marigolds.

4. Wedding Trousseau Gift Hamper Lid

Glue a sacred jharoka plaque onto the velvet lid of dry fruit presentation trays, shagun sweet boxes, and bridal trousseau hampers.

5. Pooja Room Rangoli Centerpiece

Place this freestanding architectural piece at the center of an intricate floor rangoli pattern surrounded by glowing oil diyas.

6. Festive Living Room Wall Gallery

Arrange this jharoka set alongside brass wall sconces, bells, and ethnic paintings to create a traditional Indian feature wall.

7. Griha Pravesh Housewarming Favors

Present these beautifully packaged deity pairs to guests as an auspicious, ready-to-hang housewarming return gift.

8. Framed Heritage Shadow Box Art

Mount this jharoka inside a deep wooden shadow box frame over a dark raw silk mat to produce museum-style spiritual wall decor.

9. Office Reception Auspicious Decor

Attach this pair behind the office reception desk or above commercial entryway thresholds to foster positive energy and business prosperity.

10. Decorative Brass Aarti Plate Backdrop

Secure one jharoka standing behind a brass pooja thali during festive aarti ceremonies to elevate the ceremonial altar setting.

11. Festive Dining Table Runner Ends

Position the plaques at both ends of an embroidered silk table runner to anchor your festive banquet layout during family celebrations.

12. Handcrafted Festival Greeting Keepsakes

Mount the plaques onto handcrafted wooden display easels to present them as personalized spiritual desk keepsakes.

Step-by-Step Wall Mounting & Installation Guide

Mounting this laser cutout correctly ensures that your festive decor remains secure, level, and damage-free:

Step 1: Placement & Alignment:

• Hold the jharoka plaques against your intended wall, door, or wooden altar.

• Use a spirit level and measuring tape to align both plaques at equal heights on either side of the center line.

• Mark the top hanging point or perimeter lightly with a pencil.

Step 2: Method A – Cord Hanging via Integrated Eyelet (Recommended for Walls):

• Thread a thin golden metallic cord, nylon filament, or sturdy cotton thread through the pre-drilled eyelet at the crown of the jharoka.

• Tie a small, secure knot to create a hanging loop.

• Suspend the loop from a small wall hook, decorative brass nail, or adhesive command hook.

Step 3: Method B – Adhesive Foam Tape Mounting (For Doors & Smooth Panels):

• Clean the reverse side of the MDF plaque and the target surface with a dry cloth to remove dust.

• Cut two strips of high-bond double-sided foam mounting tape.

• Press the tape strips firmly onto the upper and lower sections of the smooth reverse side of the jharoka.

• Peel off the backing liner, align with your pencil marks, and press firmly against the surface for 20 to 30 seconds.

Step 4: Method C – Permanent Glue Mounting (For Craft Hampers & Wood Boxes):

• For wooden gift platters, trays, and MDF backdrops, use clear silicone craft glue, wood adhesive, or hot melt glue.

• Spread an even bead of glue across the flat reverse side, keeping 5 millimeters away from the laser-cut edge to prevent glue spill.

• Press firmly into position and allow it to dry undisturbed for 2 to 4 hours.

Step 5: Daily Maintenance & Care:

• Dust the surface periodically using a soft, dry microfiber duster or dry paintbrush.

• Never use wet cleaning wipes, glass sprays, or liquid detergents directly on the printed wood face.

• Store unused pieces flat inside a dry storage box to prevent corner dings and protect the edges.

Why It Helps Craft Businesses & Boutiques

Saves Immense Handcrafting Hours:

• Hand-carving, sanding, and painting multi-colored architectural frames and deity faces takes days of tedious artisan labor.

• Using this ready-to-hang jharoka set allows boutique decor studios and hamper makers to finish custom wedding orders in minutes.

Guaranteed Symmetrical Quality:

• Hand-cut wooden shapes often vary in arch symmetry, print alignment, and thickness across separate pieces.

• Every unit in this 2-pair pack delivers identical 3.15″ × 5.90″ dimensions, crisp laser cuts, and uniform graphic registration.

Works on Diverse Craft Surfaces:

• The flat, sanded reverse side of each jharoka plaque adheres smoothly with double-sided foam tape, wood glue, and hot melt adhesive.

• Designers can mount these plaques onto plywood, glass, acrylic, velvet, raw silk, and hard cardboard without difficulty.

Cost-Effective Wholesale Packaging:

• Sourcing pre-cut deity plaques in a 2-pair (4-piece) bundle reduces material waste and lowers per-unit finishing costs.

• Flat wooden packing minimizes parcel shipping volume and protects the laser-cut edges from transit damage.

Product Comparison: LevonyaNXT vs. Ordinary Wall Plaques

Feature	LevonyaNXT MDF Jharoka (LNXT 0150)	Plain Paper Posters	Thin Plastic Cutouts	Hand-Painted Wood Plaques
Base Material	0.20″ High-Density MDF Wood	150 GSM printed paper	Flimsy 1 MM PVC plastic	Variable wood scraps
Edge Quality	Smooth computerized laser cutting	Die-cut paper edge	Rough molded plastic	Hand-sawn uneven edges
Print Durability	UV-cured fade-resistant inks	Fades and tears easily	Scratches off easily	Inconsistent paint layers
Structural Rigidity	Solid 5 MM thickness (No bend)	Rolls and creases	Bends and curls	Varies by wood scrap
Mounting Options	Hanging eyelet, tape, or glue	Tape or thumbtacks	Tape only	Screws or heavy hooks
Pack Value	Wholesale Pack of 2 Pairs (4 Pcs)	Sold singly	Sold in bulk sacks	Sold individually

Technical Specifications

Detail	Specification
Product Model Code	LNXT 0150
Brand	LevonyaNXT
Focus Keyword	jharoka
Category	Laser Cutouts / Devotional MDF Wall Art & Decor Plaques
Horizontal Width	3.15 Inches / 80.01 MM
Panel Thickness	0.20 Inches / 5.08 MM
Vertical Height	5.90 Inches / 149.86 MM
Base Material	High-Density Medium-Density Fibreboard (MDF)
Surface Finish	High-Definition Multi-Color UV Digital Print
Deity Motifs	Goddess Laxmi Ji (“शुभ”) & Lord Ganesh Ji (“लाभ”)
Suspension Type	Pre-Drilled Top Hanging Eyelet (Nail / Thread Mount)
Pack Size	Wholesale Pack of 2 Pairs (4 Individual Pieces)
Country of Origin	Handcrafted in India

Care & Storage Guidelines

• Cleaning Instructions: Gently wipe the printed surface of this jharoka plaque with a soft, clean, dry microfiber cloth to remove dust and fingerprints. Do not soak in water or use wet wipes.

• Avoid Liquid Cleaners: Keep the plaque away from direct contact with perfumes, cleaning sprays, and water splashes to prevent swelling of the MDF wood core.

• Store Flat in Storage: Store unused pieces flat inside a dry storage box or sealed plastic pouch away from excessive moisture and direct sunlight.

• Handling Safety: Do not drop onto hard tile floors; handle the jharoka by its outer frame to protect the delicate laser-cut crown from impact.

• Adhesive Advice: When mounting onto smooth doors or hampers, apply high-bond double-sided foam tape or clear craft glue evenly across the flat reverse side.

Why Choose LevonyaNXT Craft Supplies?

At LevonyaNXT, we provide dependable, ready-to-use craft supplies designed to help bridal tailors, boutique owners, and DIY makers build beautiful finished products with ease.

Every single jharoka plaque in this 2-pair pack is inspected for clean laser cuts, crisp print alignment, smooth wood edges, and vibrant colors before packing.

By choosing LevonyaNXT handcrafted decor accessories, you receive quality materials that bring lasting beauty, neat craftsmanship, and festive style to your decorative projects.

Whether you run a festive decor brand, create luxury wedding hampers, or enjoy weekend DIY projects at home, LevonyaNXT supplies the dependable craft bases you need to make your creative ideas a success.

Frequently Asked Questions (FAQs)

Q. How many pieces are included in this pack?

A. This wholesale pack contains 2 pairs (4 individual pieces total: 2 Goddess Laxmi Ji plaques and 2 Lord Ganesh Ji plaques).

Q. What are the exact dimensions of each jharoka plaque?

A. Each unit measures 3.15 inches wide, 5.90 inches tall, and 0.20 inches thick (approx. 80 MM × 150 MM × 5 MM).

Q. What materials are used to make this devotional cutout?

A. It is crafted from high-density engineered MDF wood featuring precision laser-cut edges and high-definition UV digital graphic printing.

Q. How can I mount this jharoka on my home entrance door?

A. You can hang it using the pre-drilled eyelet at the top with a thread or hook, or attach it directly using heavy-duty double-sided foam tape.

Q. Can I glue it onto wedding shagun gift hampers?

A. Absolutely! The flat, smooth MDF reverse side bonds firmly to velvet boxes, raw silk platters, and cardboard trays using clear craft adhesive or hot melt glue.

Q. Are the auspicious words Shubh and Laabh written on the plaques?

A. Yes, each jharoka displays sacred Hindi lettering: “शुभ” (Shubh) above Goddess Laxmi and “लाभ” (Laabh) above Lord Ganesha.

Q. Can this product be used outdoors?

A. It is designed for indoor use or covered entryways; avoid direct exposure to rain and high humidity to protect the wood core.

Q. Will the colors fade over time?

A. The graphics are printed with UV-curable inks that resist fading under normal indoor lighting conditions.

Q. Is the MDF base prone to bending or curling?

A. No, the solid 0.20-inch (5 MM) thickness provides structural rigidity, keeping each jharoka completely flat.

Q. Can I use this for Diwali gifting?

A. Yes, the set makes an auspicious and meaningful gift for Diwali, Griha Pravesh poojas, weddings, and festive family celebrations.

To discover more about traditional palace architecture, arched balconies, and Indian temple window heritage, explore the Jharokha Wikipedia Page. Browse our complete catalog of decorative craft supplies in the LevonyaNXT Craft Supplies Collection, and see our wide range in Laser Cutouts.